Birds can be kept out by sticking our bird-resistant strips to the side of the solar panels. These stainless steel strips, fitted with pins, are available in 2 variants, with pin lengths of both 160 and 210 mm.
Compared to similar products, this Ketrop product distinguishes itself by the extra strips that you have to apply to reinforce the outside. As a result, the birds cannot pull the pins apart and therefore really cannot crawl under them.
Carefully read our enclosed manual. This ensures complete and long-lasting shielding.
With our solar panel bird protection you still have enough ventilation under the solar panels.
What pin length do I need?
Measure the distance from the top of the solar panel to the deepest point of the roof covering, if it is smaller than 160 mm, then choose the 160 mm variant.
What is the length I need to order?
Measure the circumference of your solar panels: this total length, rounded up, must be ordered.
With every order you will receive 4 corner connectors and 1 connector per meter with bolts and nuts in stainless steel with which you can screw the whole thing together. If you have more angles, please let us know.
What do I use to mount the Solar Panel Bird Protection 210?
By means of glue:
- Powerbond is a thicker adhesive with a high initial tack, so it sticks immediately.
- Drilling screws stainless steel A2 3.9 x 13 mm (screws are possible, depending on the conditions of the solar panel supplier).
Properties:
210 mm pin length, 2 mm pin thickness, strip length: 100 cm.
When do you use this product?
This product is efficient against: Jackdaw, Pigeons.
This product is efficient at the following places: Side solar panel.